How do I reset this phone?

The reset for the Epix is quite simple, under the settings menu, there is actually an icon that say "Hard Reset". Click it, then follow the prompts. The default code that worked for me was 0000. If that doesn’t work, someone changed it. You will then be prompted to type 1234 and continue to accept the command. You’re done!

How to perform a hard reset on the Palm Treo Pro.

These steps will erase all data from the device. You may want to synchronize if possible before trying these steps.

1. Take the back panel off to expose the reset hole.
2. Press Power to turn on the screen.
3. While pressing and holding End, use the tip of the stylus or a small paper clip to press and release the Reset button.
4. Continue pressing and holding End until the Erase all data? prompt appears.
5. Press Up.
6. Wait for the progress bar on to fill up, then you can use the device again.

Here is how you do a hard reset or factory reset of the T-Mobile G1.

• Power off the G1
• Hold Home Key + End key for 20 seconds or till you see a triangle with an exclamation point and a picture of the G1
• Open the QWERTY keyboard and hit Alt+W

You will see a little animation and it will reset on it’s own from that point.

1. Remove the storage card from the device, if one is present.
2. With phone powered off:

• Press and hold both the left and right softkeys.
• While both softkeys are held down, press and hold until the unit powers on.

3. As the device begins to power on, release both softkeys.

Note Once the phone powers on, you should see an onscreen alert message (a white screen with blue text). If you do not see this screen, let the device power up normally, turn it off again, and then repeat steps 2 and

4. Immediately after the alert screen appears, press the left softkey.

5. If the reset was successful, the device displays a pop-up message stating the device is currently reformatting. This process can take several minutes. Allow the process to finish without interruption.

6. When the device has finished resetting, follow the Windows Mobile setup instructions displayed on the screen.

Just power on holding up and it will ask if you want to erase all data. Press 1 to erase and y to confirm.

Power on holding the center button and it will ask you if you want to hard reset. That’s it.

Use the Clear Storage option in the Start > Accessories menu.

or

Press and hold both soft keys while powering on the device. the timing can be tricky but it will work if your persistent.

You can always use the Master Reset from system tools, or just make sure the Q9h is off, then hold down E and Z on the keyboard, then turn on while holding the E and Z. That’s it.

To hard reset the Palm Treo 750 from Cingular follow the easy instructions below. Remember, doing a hard reset will erase all data and programs in memory. It is a good idea to hard reset a device before you sell it.

This is one of the easiest resets around.

1. Press the End Button (Red Button) and press the soft reset button under the flap on the right side that houses the Mini-SD card at the same time. You have to hold it for a brief moment.

2. When the “Erase all data” screen comes up, release the button and the soft reset and push the Dpad up for Yes.

3. That’s it, the device will reboot and all you data is sent to the bit bucket.

To soft reset a Cingular Palm Treo 750, just hold in the soft reset button only.

Unlike the Treo 650, the Treo 680 does not have a reset button under the battery cover. Instead, you will be removing the battery to reset. Read below for details. There are several methods found online, this one seems to be the most “Official”. I will say that it sounds somewhat silly to have to remove the battery to perform this.

HotSync note: Some third-party applications change the way your device backs up data. Other third-party applications do not back up data. If you have third-party software on your device, please contact the developer to learn what components are backed up during a HotSync operation, and if HotSync conduits are altered. Any data not backed up will be lost.

1. Hold down the power (on/off) button on your device.
2. While holding down the power button, turn your smartphone over to see the battery cover.
3. While still holding the power button, remove the battery cover, and fully remove the battery from the device.
4. While still holding the power button, re-insert the battery, and replace the cover.
5. When the Palm logo appears, release the power button.
6. A message will appear warning that you are about to erase all the data stored on your device. Press UP to complete the hard reset, erasing everything on your device.
7. Your device will then take you through a series of screens to calibrate the digitizer and verify the time and date. Then it will walk you through a brief guided tour of device features and functions.